美国mg600进口焊条特种焊条原装进口
slik-sil 104 is used to join similar and dissimilar metals such as copper, nickel, stainless steel, brass, bronze,
inconel®
and monel®
. excellent for carbides, light gauge metals (except white metals), heat-treated parts and
tight-fitting joints. color is silver to light yellow, similar to polished brass.
procedure:
prepare surfaces to be joined by mechanical or chemical cleaning. fixture parts to maintain alignment. joint
clearance should not exceed 0.005”. heat parts uniformly with a slightly carburizing flame. place slik-sil
thermal flux directly0n the heated joint. when the flux becomes clear and fluid, melt a small amount of alloy
onto the joint and continue heating to uniformly spread the alloy through the entire joint area. do not
overheat the base metal. allow the part to cool slowly, then remove flux residue by brushing in warm
water.
*bare rod and flux is available as slik-sil 114. use with slik-sil flux for regular applications or mg high therm
flux for high heat applications.
**inconel®
and monel®
are registered trademarks of special metals corporation
mg 公司的 mig/tig 不锈钢焊丝
产品
典 型 工 业 应 用
焊缝金属的主要化学成分
cr
ni
mn
si
c
mo
ss308
食品处理、化学、酒店及精炼设备。用于焊接类似成分的不锈钢；如 201 ， 202 ， 301 ， 302 ， 304 ， 305 ，及 308 等。
20.0
9.3
1.81
.48
.049
.
ss308l
用于乳制品，纸浆与造纸，纺织印染，精练等方面化工设备的焊接和修复。低碳含量可以减少碳的沉积。用于焊接 304l ， 308l ， 321 ，及 307 等。
19.9
10.0
1.79
.48
.024
.
ss309l
低碳含量提供了碳化物沉积的阻力。用于覆盖、连接不锈钢与碳钢、船用螺旋桨轴的制造等。
23.3
13.6
1.71
.40
.020
.
ss ss310
用于热交换器，炉零件及燃烧室的焊接型 310 。用于修理造纸发酵设备和化学设备和连接不同的钢材。
25.5
20.5
1.65
.40
.11
.02
ss316
用于焊接型 316 ，具有较高耐腐蚀性和较高屈服强度，用于制药、照相、精练、食品与化学设备。
19.3
11.5
1.8
.40
.046
2.1
ss316l
必须避免碳沉积的焊件和 316l 钼轴承钢制造的处理设备。
18.9
11.8
1.9
.46
.017
2.2
ss317l
用于对 316l 型来说腐蚀太严重的污染控制设备和在氯环境中点蚀严重的地方。低的含碳量可阻止碳化物的沉积。
19.2
14.1
1.7
.48
.029
3.6
ss347
用于连接 347 和 321 不锈钢。铌的含量可以减少铬 - 碳化物的沉积，及在高温下加强焊接金属。
19.3
9.7
1.3
.38
.037
清河县亿力焊接材料有限公司
13503197976
qq: 995115186
